5" Wood lathe face plate with your choice of threaded hole. See details below.

Description

This is an all aluminum face plate for wood lathe spindles & similar applications.
You must send me a eBay message on what threaded hole you need before ordering.
Your choice of thread hole listed below.  If you need another size not listed I can order whatever you need.
1/2" diameter reamed hole.
5/8"
diameter reamed hole.
3/4"
diameter reamed hole.
1/2" x 20 threads right hand.
1/2" x 20 threads left hand.
1/2" 20 threads right & left
(both threads in same hole for inboard & out board spindle lathes)
3/4" x 10 threads right hand.
3/4" x 16 threads right hand.
3/4" x 16 threads left hand.
3/4" x 16 threads right & left
(both threads in same hole for inboard & out board spindle lathes)
7/8" x 14 threads right hand.
1" x 8 threads right hand.
1" x 8 threads left hand.
1" x 8 threads right & left
(both threads in same hole for inboard & out board spindle lathes)
1-1/8" x 7 threads left hand
1-1/8" x 8 threads right hand.
1-1/8" x 8 threads left hand.
1-1/8" x 8 threads right & left
(both threads in same hole for inboard & out board spindle lathes)
1-1/4" x 8 threads right hand.
1-3/8" x 10 threads right hand.
Any size hole up to 1-3/8" diameter
It has a 1.9" diameter mounting hub that is 1-1/2" long from the front face of the plate.
Has 1-5/8" wrench flats.
The face plate is 1/2" thick &
has a 4" diameter circle having 6 equally spaced screw mounting holes.  These screw holes are 1/4" diameter & are c'sunk to 1/2" diameter.
If you need a shorter hub length also let me know.
Other thread sizes are possible let me know what you need before ordering.
I have smaller & larger wood lathe face plates, see my complete listings.
This will shipped in a priority small flat rate box & you should it receive it in 2-4 days.
Ships only to the USA
No returns